Pro-face GP-4200 Series, Hardware Manual

Page: 240 / 241

240
Removal procedure
Step Procedure Details
1 Remove the screws from the four bosses fixed in place on the rear surface of
the resin plate, and then slowly remove the GP unit from the resin plate.
CAUTION
RISK OF INJURY
Be careful of the glass of the front of the GP unit.
z
Wear gloves when you are installing the GP unit.
z
Do not push the LCD panel strongly.
When installing the GP unit with the flat mount orientation, affix the Overlay to the front of
the GP unit.
Do not drop the GP unit when you remove it from the panel.
z Hold the GP unit in place after removing the fasteners.
z Use both hands.
Failure to follow the instruction can result in injury or equipment damage.
Removal diagram (profile)