Introduction
1-2
FP2600-T41 User Manual
1-2 Optional Equipment
All optional items listed below are products of Digital Electronics Corporation.
Model
Description
SIO Cable
FP61V-IS00-O
Serial interface cable (5m) used for touch
panel data transmission between the host
and the FP or command transmission to
the FP. This is a straight Dsub9 pin
female cable.
RGB Cable
FP-CV00
FP-CV01
Analog RGB interface cable when image
signal is output to the FP from the host.
VGA specifications (Dsub15 pin male)
FP-CV00 (2.5m), FP-CV01 (5m)
USB Cable
FP-US00
USB interface cable (5m) used for touch
panel data transmission between the host
and the FP or command transmission to
the FP.
A-B type cable.
Backlight
Bulbs
PS600-BU00
Replacement Backlight bulbs .
Installation
Brackets
GP070-AT01
Metal installation brackets for FP2600-T41
Rubber
Gasket
GP-WP10-MS
Replacement rubber gasket, used when
installing the FP. Same as the FP's
original gasket.
Cover
Sheet
(Hard type)
PSL-DF00
Provides disposable screen protection from
dust and other elements. The touch panel
can be used with the Cover Sheet attached
(5 sheets / set)
Mouse
Emulator V2
PL-TD000
Mouse Emulator software for FP.*
Item
Interface
Maintenance
Parts
Optional
Parts
* Operation environment is Windows
®
95, WindowsNT
®
4.0, Windows
®
98, Windows
®
2000.
When you use PL-TD000, hardware settings can not be automatically detected.
As a result, select the FP unit's currently connected COM Port, and enter the
settings given in the FP manual for the Allocated I/O address and Interrupt.
