8
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Waste batteries can be returned to any waste battery recycling
point which are provided by most battery retailers. Contact your local authority for
details of battery and recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
Cd
CLEANING AND MAINTENANCE
Changing the battery
•
If after a routine operation check, the lamp does not remain lit for the 3 hour period,
a new battery pack may be required. Change the battery pack as follows:
1. Isolate from the mains supply.
2. Remove the fitting from the ceiling cut-out.
3. Extract the battery and emergency unit from above the ceiling.
4. Unplug the in-line battery pack connector and remove the old battery pack.
5. Write the current date on the new battery pack and connect it.
6. Insert the emergency unit and battery into the ceiling space and refit the lamp into
the hole making sure that it is securely clipped in place.
7. Restore mains power and allow to charge for 24 hours.
8. Perform the full operation check and update the test record.
SPECIFICATIONS
Input voltage:
220-240V~, 50Hz
Rated power:
1.0W
Lamps:
White LED 1W 6000k model
Luminous flux:
90 lumens (DC)
Continuous emergency illumination:
> 3 hours (when battery is fully charged)
Battery pack:
Ni-Cd 3.6V 1.5Ah
Recharge time:
24 hours – approx.
Ambient temperature:
0°C - 40°C
Over-discharge protection:
Yes
Ingress protection rating:
IP20
•
Clean this product with a soft, dry cloth only. Do not use any solvents or abrasive
chemical cleaners.
•
The LED lamp in this product is non-replaceable.
