7
OPERATIONAL CHECKS
Note:
This equipment must be checked regularly in compliance with local regulation and
codes of practice. For your own safety, testing should occur during the day.
•
After installation, you should allow 24 hours for the battery pack to charge fully
before testing.
•
Isolate the power supply and check that the lamp remain illuminated for at least
three hours. Restore the power supply.
•
Each day: Check that the green charging LED is lit.
•
Each month (short test): Isolate the power supply and check that the lamp remains
illuminated. Record the results on the test record sheet included with these
instructions.
•
Every six months: Isolate the power supply and check that the lamp remains
illuminated after 1 hour. Record the results on the included test record.
•
Once each year: Isolate the power supply and check that the lamp is still illuminated
after 3 hours. Record the results on the included test record.
Please keep these test records in a safe place. A fire officer or other authorised
person may want to see your record of inspection and testing.
Battery
E
N
L
State Led
Output
Mains
Supply
Input
Battery
LED Lamp
In-line connector
Emergency
Pack
Charge
Indicator
LED (green)
Emergency
operation
(white)
