Pro-dig DDT25K, Instruction Manual

Page: 3 / 20

SAFETY STATEMENTS
THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF
THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH COULD RESULT
IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS STATEMENT IS USED WHERE MINOR INJURY COULD RESULT IF THE IN-
STRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS SYMBOL BY ITSELF OR USED WITH A SAFETY SIGNAL WORD THROUGH-
OUT THIS MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS
INVOLVING YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE
TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
READ MANUAL PRIOR TO INSTALL
Improper installation, operation or maintenance of the equipment could result in
serious injury or death. Operators and maintenance personnel should read this
manual as well as all manuals related to this equipment. Follow all safety instruc-
tions in this manual.
READ AND UNDERSTAND ALL SAFETY STATEMENTS
Read all safety decals and safety statements in all manuals prior to operating or
working on this equipment. Know and obey all OSHA regulations, local laws and
other professional guidelines for your operation. Know and follow good work prac-
tices when assembling, maintaining, repairing, mounting, removing or operating this
equipment.
KNOW YOUR EQUIPMENT
Know your equipment’s capabilities, dimensions and operations before operating.
Visually inspect your equipment before you start, and never operate equipment that
is not in proper working order with all safety devices intact. Check all hardware to
assure it is tight. Make certain that all locking pins, latches, and connection devices
are properly installed and secured. Remove and replace any damaged, fatigued or
excessively worn parts. Make certain all safety decals are in place and are legible.
Keep decals clean, and replace them if they become worn and hard to read.
DO NOT MODIFY EQUIPMENT
Modifications may weaken the integrity of the equipment and may impair the func-
tions, safety, life, and performance of the equipment. When making repairs, use
only the manufactures genuine parts, following authorized instructions. Other parts
may be substandard in fit and quality.
!
DANGER
!
WARNING
!
!
CAUTION
!
WARNING
!
WARNING
!
WARNING
!
WWW.PRO-DIG-USA.COM
785.856.2661
3
DDT25K
DDT25K