background image

 

Instruction manual

6

Safety notes

    The warning signs and the sample icons shown here are listed for you to use this 

product safely and correctly as well as to prevent the risk of injury.

    The icons and meanings are as follows:

Warning sign

Contents

Warning

This sign indicates matters in which the possibility of death or severe bodily 

injury may arise as a result of incorrect handling.

Caution

It indicates matters in which bodily injury or material damage* may arise as a 

result of incorrect handling.

* Material damage refers to a wide range of damage involving your house, household goods, domestic animals and pets.

Examples of signs

The 

 icon indicates caution (including warning 

and danger). 

Matters involving actual caution are indicated by 

text or pictures in or near   .

The pictured 

icon refers to 

‘caution for 

flammability’

The pictured 

icon refers to 

‘caution for 

electric shock’

The 

 icon indicates prohibitions (what you 

cannot do).

Matters involving specific prohibitions are 

indicated by text or pictures in or near   .

The pictured 

icon refers to 

‘prohibition to 

disassemble’.

The pictured 

icon refers 

to ‘general 

prohibition’.

The   icon indicates something that is 

compulsory (must be observed at any time). 

Matters involving specific compulsory actions 

are indicated by text or pictures in or near   .

The pictured 

icon refers 

to ‘general 

compulsion’.

The pictured 

icon refers to 

‘unplugging the 

power plug’.

 Warning

Only use medications as prescribed and instructed by your doctor.

• Your physical condition may change for the worse.

When you use the unit for the first time after purchasing or after having not used it 

for a long time, be sure to clean and disinfect it.

• Miscellaneous types of bacteria may propagate and you may get infected.

Clean and disinfect the medication cup, medication cup cover and inhalation hose 

each time the unit is used. 

• Miscellaneous bacteria may propagate and you may get infected. If the unit is 

going to be used by more than one person, prepare a disinfected medication cup, 

medication cup cover and inhalation hose for each person before using it. This will 

prevent cross-infection.

Be sure to immediately dry the cleaned and disinfected parts, and then store them 

in a dry place in order to prevent them from getting contaminated in the future.

In case of any problem with your nebuliser please contact your local PRIZMA service 

representative (address on/inside package) 

Summary of Contents for PROFI SONIC H





























Reviews: