background image

Professional ultrasonic nebuliser

7

 Warning

Do not use

 this device in presence of explosive gases or in 

areas with high risk of 

explosion

.

Use with non­flammable liquids only.

Do not use this device in combination with ventilation equipment.

Do not use in oxygen rich environment.

• The pressure in the ventilation system may reduce significantly.

When assembling the cleaned, disinfected and dried parts, do not touch the places 

where the medication and nebulised medication pass through directly with your 

hands to prevent possible infection.

Do not make any contact with the vibrator while the power plug is plugged into the 

electric outlet.

• You may suffer electric shock or you may injure yourself.

Do not use this device when ambient temperature is above 30°C.

Do not plug in or pull the power plug from the electric outlet with wet hands.

• You may suffer electric shock or you may injure yourself.

Do not wash the main unit with water or splash water to the power source, do not 

use the nebuliser while you are in bath or having a shower, never submerse the 

nebuliser in water.

• Short circuit may occur in the unit or you may suffer electric shock.

 Caution

Use only aqueous drug solutions to inhale using the nebuliser.

• If you use unsuitable solvents, it may cause failure of components and malfunction 

of the unit.

Clean the nebuliser with disinfectant and wash off thoroughly with water.

• If you inhale any of the remaining disinfectant, your physical condition may change 

for the worse.

If the nebulisation parts have already become contaminated before using the unit, 

clean them first before use.

• If the medication remains in the nebulisation unit, your physical condition may 

change for the worse.

Replace the water in the water tank each time you use the unit.

• A dirty vibrator may cause lower nebulisation rate.

Disposal of the product should be carried out in accordance with the national 

regulations for the disposal of electronic products.

Safety notes

Summary of Contents for PROFI SONIC H





























Reviews: