The PRIZM Sound Board User's Manual
Plecter Labs is in no way affiliated, associated, licensed or endorsed by Disney or Lucasfilm Ltd., Industrial Light
and Magic or any of their associates.All brands and trademarks listed are the exclusive property of their respective
Owners.
46
A few special features have been incorporated to R.I.C.E. to ease the color selection
process.
Rough color setup
With Prizm, the blade (and FoC) color are defined in profiles. We therefore set a single
color setting tab with the selection of the color profile being edited.
While it is possible to change on the fly the amount of profiles used on the saber, the
best practice is to first set as many profiles as you want to use manually in the
configuration file, with a default drive on channel 1, like the following:
color0=800,0,0
fcolor0=800,400,0
From there, you can edit those in RICE by selecting the color with the swatch.
The swatch of course doesn't know how your LEDs are wired (multi-led or multi-die).
so we setup a color channel swapping system so the color selection with the swatch
affects the right current channels 1, 2 and 3. Obviously, as the swatch deals with RGB,
only RGB combinations are present there.
Color fine tuning
Once you're happy with the shade, you can still adjust individually each drive to make
the color more saturated, or brighter.
If you're having a channel on which you discarded the resistor, make sure you don't
exceed the drive you previously found out as the limit.
