The PRIZM Sound Board User's Manual
Plecter Labs is in no way affiliated, associated, licensed or endorsed by Disney or Lucasfilm Ltd., Industrial Light
and Magic or any of their associates.All brands and trademarks listed are the exclusive property of their respective
Owners.
32
the shimmer parameters affect the blade behavior during the Flash on Clash
effect. That special “all mixed” mode will swap back and forth between the
main blade and FoC blade colors ensuring that the FoC color doesn’t wipe out
the main blade color
color=300,0,750
fcolor = 500,500,500
focmix=111
C)
Using a RGW tri-rebel or tri-cree. FoC color is an alteration of the blade main
color (ie : the blade color changes) but the third die is also added on top. Let’s
take this time the example of a blue blade that would become cyanish during
FoC plus the white die on top, in order to both affect the color and overall
increase the blade brightness. The first 2 color channels remain mixed during
the Flash on Clash effect, for the whole duration of the shimmer, while the
white die is applied on top, during its own specific duration (
focd
).
color=1000,200,0
fcolor=1000,500,700
focmix=011
Whether you plan just a color change or see the FoC as another die lighting up, the
user must consider the amount of current available from the battery pack. A color
change might actually consume a lot more current than the "normal blade" (like
moving from a red blade to a white FoC). To match the battery pack capabilities, the
overall current of the different die could need to be lowered to obtain the right color
but with less brightness.
