Priva B.V.
14
FS Concentrator – installation manual – 1.2
Installation - electrical part
Because the FS Concentrator is a permanently connected equipment, a readily
accessible disconnect device must be incorporated external to this equipment.
An overcurrent protective device for max 20 A must be provided external to this
equipment.
The electrical power shall be connected through cables according to local
regulations.
Electrical connection
The FS Concentrator can be connected to any standard power socket. This is done by connecting
any standard power cable according to local regulations.
The following steps are to be taken in account to properly install the FS Concentrator:
1.
The installer selects the ideal location for the FS Concentrator.
2.
The installer opens the casing of the FS Concentrator with a screwdriver.
3.
Make sure that the power switch (Figure 1: in the yellow square) is in the “OFF” position.
Figure 1
