14
Prior to each lift, this will be completed by the user, the Easy Fit system and associated hoist,
accessories and sling(s), must be visually inspected . Refer to the hoist, accessory and sling user
guides for specific details regarding their inspection .
Should any of these items below fail the inspection do not use the Easy Fit system - Contact your local
authorised dealer for service
Visually check for the following:
• The Easy Fit system parts should not be loose, broken or bent
• The bases are on a stable, level surface and the side Stand Support are secure and in the green safe zone
(see fig 5a . below) .
• Ensure that both side support assemblies are completely vertical from all directions (see fig 5b . below)
• The trolley moves easily along the track
• The top plate and bottom plate must be cleaned with wet cloth before installation in order to remove dirt
on rubber moulds .
• The adjustment track is placed in the correct location for transferring
• The portable hoist has been inspected as outlined in its owner’s manual
• The sling (s) has been inspected as outlined in its owner’s manual .
Fig 5a
Fig 5b
1 . See (fig 5a .) - Ensure Pressure guide is in the Safe Zone .
Note: Green section must be visible on both
sides of the guide.
2 . See (fig 5b .) - Ensure both sides are vertical from the front and the side
7. Pre-Use Inspection and
Maintenance
90°
Summary of Contents for Easy Fit
Page 1: ...1 User Manual...
