Priorit PRIODOOR ETX-RDA, Assembly And Operating Instructions Manual

Page: 5 / 21

5
General safety instructions

The operating / installation instructions must be kept in the place in which the product is used at
all times.

Legally stipulated safety instructions must be attached in a place visible to the users.

All safety instructions and hazard warnings and the nameplate must be kept in a legible
condition.

Use the products only if they are in a proper condition.

Note the technical details of the respective product given in our catalogue or data sheet.

Improper installation can impair the protective function.

Follow all information and instructions in these operating and maintenance instructions.

The locking systems must not be changed or replaced.

May only be installed by skilled personnel.
Intended use

The products described in these operating/assembly installations are built to state-of-the-art
standards and the recognised rules of safe practice.

They may only:
- be used for their intended purpose in indoor areas and
- only used if they in a faultless, safe condition

Any other use is deemed not to be as intended and is therefore misuse.
PRIORIT is not liable for the resulting damage and any consequential damage.
Functional test, safety check,
Care and maintenance

Test the function of the chain drive 2x yearly.

We recommend that you perform a functional check and visual inspection once a month. The
safety check can only be performed with the necessary care by a qualified employee, as
adequate experience and a comprehensive level of knowledge are indispensable.

Visual inspection of the door leaves and frame for mechanical damage; replace any damaged
parts if necessary.

Visual inspection for corrosion damage, replace the affected components if necessary.

Visual inspection of the door leaves, frame and hardware for dirt; clean if necessary.

Visual check of the smoke and fire resistant seals for damage and completeness, replace seals
if necessary.