Printronix SLPA7000e, Training Manual And Reference Manual

Page: 10 / 76

10
Chapter 1
Threading The Label Roll
Figure 3. Loading Label Media
6. Slide the new label roll onto the label roll hub (unwinding
counterclockwise) and against the label roll back stop.
7. Angle the flat edge of the collar so that it aligns with the flat edge of the
label roll spindle.
8. Place the label roll retainer onto the label roll spindle until it is flush with
the label roll, then tighten the black cam lock.
NOTE: If necessary, loosen the set screw on the collar and adjust the core
blade so that it cuts into the label core.
Label Roll
Back Stop
Label Roll
Collar
Label Roll
Retainer
Cam Lock
Label
Label Roll
Spindle