GETTING STARTED
Inspect the boxes for damage and check the parts
against the supplied parts list.
Note: Report damaged parts or shortages immediately to
prevent job slowdown/stoppage to place of purchase.
Refer to the Build-A-Border document provided on our
webiste at P-LED.com/street-wrap-gen-2 and confirm
job measurements.
Lay out your job on paper, making note of Power
Supply placement. Power Supplies can be placed at the
end of runs or side by side to power allowable linear
footage in each direction.
COMPONENT IDENTIFICATION & REQUIRED TOOLS
MATERIALS
Aluminum Extrusion
Lens (Acrylic)
Mounting Clip
Profile Dimensions w/ Mounting Clips
Acrylic, UV and impact resistant
Aluminum
Street Wrap 1.25”W x 96”L x 2.1875”H
REQUIRED TOOLS
• 25' Measuring Tape
• 100' Measuring Tape Framing Square
• Square -1’
• Phillips Screwdriver
• Portable Rechargable Drill
-5/16" hexbit and unibit
-Masonry bits (If brick wall)
• Extension Cord
• Phillips Screwdriver
24VDC LIGHT TAPE SPECS
ELECTRICAL
CONTENTS
Input
100-277VAC
Output
24VDC
Maximum Load
96W
Current at Max. Load
4A
1.
2.
3.
Note: If job measurements do not correspond to provided drawing, call
Principal LED immediately at (325) 227-4577. Remember: No more than
four (4) 96” units per 96W Power Supply.
Following these few simple steps will ensure a successful
installation each time.
Read all instructions before starting installation.
Color
W/Ft.
W/Unit
Pure White
2.75
22
Red
2.75
22
Blue
2.75
22
Green
2.75
22
*RGB
2.75
22
• Sawzall or Compound Saw
• Carpenter Pencil
• Caulk Gun
• Box Knife
• Wire Strippers
• Wire Snips
• Laser Tool or Chalk Line Substitute
Fasteners for the Application if Applicable
W
warranty
5
P
5
L
Page 2
Mounting Bracket Layout
Page 3
Installing Street Wrap into Mounting Brackets
Page 4
How to Wire RGB
Page 5
Custom Cut to Fit End of Runs & Corners
Page 6
Corner Mounting Options
Page 7
Mounting on Incline or Vertically
Page 8
Connecting Transformers
24V Light Tape comes pre-installed.
LED TUBE
X-C-SR2-ULXX
LED TRACK
X-C-SR2-BASE
MOUNTING BRACKET
A-SR2-BKTS
END CAP
A-SR2C-ECYY
ANGLE BRACKET
QWIK BOX™
96W Power Supplies
PL-96-24-U (P-OH096-24-PL)
INSIDE CORNER PIECE
A-SR2C-CIYY
OUTSIDE CORNER PIECE
A-SR2C-COYY
PLTC CABLE
PL-LE3-PLTC-18-2
MIDDLE CONNECTOR
A-SR2C-MXYY
YY = Blue (BL), Green (GR), Red (RD), White (WH)
