14
Adjusting the screen display
(When using a digital signal)
Adjustment can be made using On Screen Display
(OSD) Menu provided.
On Screen Display for adjustment
This chapter provides the procedure how to adjust
the screen by using operation Pattern.
How to adjust
1.Press the MENU button.
The COLOR Menu will be displayed.
At this point relevant menu options can be adjusted.
Each time MENU button is pressed the next menu
is selected. (COLOR
MODE SELECT
OSD
Menu disappears)
Note:
- Like when making an analog connection, the
SCREEN Menu and the GAIN CONTRAL Menu
are displayed. However, you don’t need to adjust
these items.
- The OSD Menu automatically disappears
approximately 30 seconds after the last command.
COLOR Menu
Notes:
-
Use the
ef
buttons to select [9300], [6500], [5000]
or [USER].
- Selecting [USER] will display the setting values for
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine
adjustments.
-
Use the
d
/ MODE button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
- To go to the next menu: MENU button
9300
……Color tone bluer than standard
6500
……Color tone standard setting
5000
……Color tone redder than standard
USER
R-CONTRAST..…
e
button for blue-green
f
button for red
G-CONTRAST..…
e
button for purple
f
button for green
B-CONTRAST..…
e
button for yellow
f
button for blue
COLOR
9300 6500 5000 USER
CONTRAST
R-CONTRAST
G-CONTRAST
B-CONTRAST
INPUT-1 ANALOG
1280x1024 V:60Hz H:64.0kHz
6500
COLOR
9300 5000 USER
CONTRAST
R-CONTRAST
G-CONTRAST
B-CONTRAST
INPUT-1 ANALOG
1280x1024 V:60Hz H:64.0kHz
6500
