Princeton Instruments PhotonMAX System, Manual, Page: 28 / 98

28 PhotonMAX System Manual Version 1.B
Controller/Camera
tab page will be displayed with the
Use PVCAM
checkbox
selected.
Figure 13. Hardware Setup wizard: PVCAM dialog box
6. After making the following selections on the
Controller/Camera
tab page, you should
now be able to control the camera and acquire data at the default Detector Temperature
setting:
• On the
Controller/Camera
tab page: Select " Frame Transfer " as the Readout
Mode.
• On the
Cleans
tab page: Select " Clear Pre-Sequence ".
Note:
For a step-by-step procedure on basic system operation, refer to the appropriate
"First Light" section, beginning on page 30 (Imaging applications) or page 35
(Spectroscopy applications).