Princeton Instruments PhotonMAX System, Manual, Page: 27 / 98

Chapter 4 System Setup 27
Figure 10. Controller/Camera tab
page
Figure 11. Cleans tab page
WinX Versions before 2.5.19.6: Run RSConfig.exe
1. Make sure the PhotonMAX is connected to the host computer and that it is turned on.
2. Run RSConfig from the
Windows|Start|Programs|Roper Scientific
menu or
from the directory where you installed WinView, WinSpec, or WinXTest.
3. When the RSConfig dialog box (Figure 12) appears, you can change the camera
name to one that is more specific or you can keep the default name "Camera1". When
you have finished, click on the
Done button.
Note:
If the first camera in the list is not the "PM Style (PCI)" PhotonMAX camera,
please refer to "Editing the PVCAM.INI File" on page 75 for instructions on editing
the PVCAM.INI file.
Figure 12. RSConfig dialog box
4. Open the WinX application and, from
Setup|Hardware…,
run the Hardware Setup
wizard.
5. When the PVCAM dialog box (Figure 13) is displayed, click in the
Yes
radio button,
click on
Next
and continue through the wizard. After the wizard is finished, the
Select
"Frame Transfer"
Select
"Clear Pre-Sequence"