6
PRINCESS CLASSIC SALOON JUICER
ART. 201950/201951
These instructions are for both Type 201950 and 201951 juicers. Check to see which type of juicer you
have purchased.
Please read these instructions at your leisure and save them for future reference. The Princess JUICER is
ideal for rapidly squeezing all types of citrus fruits and is an attractive addition to any kitchen. Before
using, we suggest that you wash the separate components (not the base motor). Refer to the section
“CLEANING”.
DESCRIPTION
1. Lid with press point
2. Juicing cone with pulp compartment
3. reservoir
4. base motor
5. On-off switch
6. indicator light
7. Drip rack
8. Drip stop (type 201951 only)
9. Lid release button (type 201951 only)
TIPS FOR USE
Plug the Princess Juicer into the socket and turn it on with the switch at the back.
Type 201950
The motor will be activated but the juicing cone will remain still because of the automatic clutch. The
juicing cone will only rotate when pressure is applied.
Type 201951
The juicing cone will only turn once the lid is closed or when the lid of the juicer is removed.
Fig. 2 Drip control mechanism open
Pressing, Type 201950 and 201951:
Cut the citrus fruit into two equal halves. Place one half onto the middle of the juicing cone and press
lightly. Put a glass under the spout (first open the drip stop for type 201951). Now close the lid. The
juicing cone will rotate. Exert even pressure until juice stops coming out of the fruit.
Tip: Juicing is easier when the fruit is placed on the press point of the lid. Make sure that the fruit is tilted
slightly forward (see fig 3).
Do not press too hard. If you hear the motor rotating more slowly or if it stops, you are
pressing too hard. The motor will not become damaged because the thermal protective
device turns the motor off if it is overstrained. If this occurs, we advise you to turn the
juicer off with the on/off switch. After a few minutes, the motor will cool down and the
Princess Juicer can be used again. Always switch the juicer off after use.
Fig. 3
