background image

 

11 

• Prior to horizontal  transport:  close the 
cap of clean detergent  bottle. 
• Tilt  the product towards you  until  it 
balances on the wheels. Then move it 
by its transportation  handle. 
• Protect the product from any  heavy 
impact or strong vibrations  which may 
occur during  transportation  in vehicles. 
• Secure the appliance  against shifting 
and tipping  over. 

Storage 

CAUTION 

Risk of personal  injury  or damage! 

Consider the weight  of the appliance 
when storing it. 

Storing the appliance 

• Park the machine on an even 
surface. 
• Detach spray lance from the trigger 
gun. 
• Push the disconnect button  on the 
trigger  gun and pull  the high-pressure 
hose out of the trigger  gun. 
• Place the trigger  gun into the storage 
for the trigger gun. 
• Put both spray lances into the storage 
for the spray lance. 
• Dirt grinder  spray lance: Nozzle 
towards the bottom. 
• Coil the high-pressure hose and hang 
it over the hose storage. 
• Store the mains connection in the 
accessory compartment. 
• Prior to extended  storage periods,  as 
during  the winter, also observe the 
instructions in the care section. 
• Always  store the pressure cleaner, 
parts, and accessories in a place that 
is inaccessible to children. The ideal 
storage temperature  is between  10 °C 
and 30 °C. Store the power washer 
indoors to prevent  the water in the unit 
from expanding  under freezing 
conditions. 
• We recommend using the original 
package  for storage or covering  the 
product with a suitable cloth or 
enclosure to protect it against dust. 

 

 

 

Frost protection 

ATTENTION

 

Appliance  and accessories that are not 
completely  drained  can be destroyed 
by frost. 
Completely  drain  appliance  and 
accessories and  protect them against 
frost. To avoid  damage: 
• Detach the appliance  from the water 
supply. 
• Detach spray lance from the trigger 
gun. 
• Turn on the appliance  “ON/OFF”. 
• Push the lever of the trigger  gun until 
no more water is escaping . 
• Release  the lever of the trigger  gun. 
• Lock the lever  of the trigger gun. 
• Turn off the appliance  “ON/OFF”. 
• Store the appliance  and the entire 
accessories in a frost free room. 

Care and maintenance 

DANGER

 

Risk of electric shock 

Prior to all work on the appliance, 
switch off the appliance  and pull  the 
power plug. 

High pressure hose 

The high  pressure hose is specially 
constructed with reinforced walls it can 
be easily damaged  and should  be 
stored carefully. 
• Do not kink. 
• Do not drive vehicles  over the hose. 
• Do not expose the hose to sharp 
edges or corners. Misuse  will lead to 
ballooning  or premature  failure  and will 
invalidate  warranty. 

Clean the sieve in the water 
connection 

Clean the sieve  in the water 
connection  regularly. 

Summary of Contents for YL4720C-100B












Reviews: