background image

 
EC-C60003 RevA_EN                                                                                                                                                2 / 8 
 

 

 
 
 

 
 
 

 

 
   
   

 
 
 
 
 
 
 
 

Remove the unit from the carton and inspect for signs of damage. If there is damage to the unit: 
• Notify the carrier within 24 hours of delivery. 
• Save carton and packaging materials for inspection purposes. 
• Contact your local dealer, or if purchased directly, the Prince Castle Sales Department at 86-21-6040-1716 
  to arrange for a replacement unit. 
• Place unit on a sturdy, level table and place the Service Pans on each side of the unit   
•Remove packing materials and clean the Egg Rings, Egg Ring Frame, Top Lid, Platen surface and

 

Service Pans in 

hot, soapy water. Rinse in clear water and allow to air dry. 
 

 

Ensure the unit is placed in a perfectly horizontal position, otherwise it will cause egg undercooked due to the 
shortage to steam.

 

 

NOTE: When using this unit, the ambient temperature at the mounting site should not exceed 43°C (110°F) 
 

 

All electrical connections must be in accordance with local electrical codes and any other applicable codes. 
Plug the unit into an applicable electrical receptacle. 
To  prevent  an  electric  shock  hazard  this  device  must  be  bonded  to  equipment  in  close  proximity  with  an 
equipotential bonding conductor. This device is equipped with a grounding lug for this purpose and is marked 
with the following symbol. 

EC12 Series 
 

 

Safety Information 

 

Electrical Specification 

Volts 

208-240V 

50/60Hz 

Frequency 

Power 

2500-3350W 

Model Number 

Model Number 

EC12 Series 

Description 

Egg Cooker 

 

       

Indicates information important to the proper operation of   

the unit. Failure to observe may result in damage to the 

equipment and/or severe bodily injury or death. 

                                 

 

Indicates information important to the operation of the unit. 

Failure to observe may result in damage to the equipment.

 

 

This equipment is intended for commercial occasions and operated 

by  trained  staff.  Operation  by  untrained  personnel  or  those  with 

reduced physical, sensory or mental capabilities may result in severe 

injury or death. 

 

Failure to connect unit to rated power supply may cause damage to 

the unit and voids the warranty. 

 

 

 

Model Number   

 

Model Number   

Installation     

Summary of Contents for EC12 Series









Reviews: