Printed in USA 03/17 © 2017
8
299-
500revC-EN
Contact Toaster – Single-Sided
CTS-W/CTS-M/CTS-WS/CTS-WCE/CTS-MCE/CTS-WSCE
TM
Daily Planned Maintenance (continued)
Clean the release sheet.
Dampen a clean cloth
with lukewarm soap and water. Wipe down both
sides of the release sheet, making sure all built-up
sugar is removed. Wipe down both sides with a clean
cloth, dampened with water, to rinse. Allow to air dry.
NOTE: Rotate sheets daily for longer life. Depending
on volume of product toasted, sheets should be
replaced every 4 to 6 weeks.
7
Reinstall the release sheet.
8
Clean the conveyor.
Put on neoprene gloves. Wipe
the conveyor with a clean cloth dampened with
Multipurpose Detergent Solution, rotating it as you
clean to reach its entire surface. Wipe the entire
surface with a clean cloth, dampened with sanitizer
solution.
Do not use abrasive cleaners or pads on the
conveyor surface.
CAUTION
9
Reinstall the conveyor.
Using the handle to lift the
conveyor, line up the side posts of the conveyor with
their notches on the CTS. Move the conveyor into the
CTS and gently release.
10
Reinstall the bun infeed.
11
Clean outside of the CTS.
Dampen a clean cloth with
lukewarm soap and water. Wipe down the outside of
the entire CTS. Wipe down the entire CTS again with a
fresh clean, sanitized cloth.
12
