299-
500revC-EN
7
Printed in USA 03/17 © 2017
Contact Toaster – Single-Sided
CTS-W/CTS-M/CTS-WS/CTS-WCE/CTS-MCE/CTS-WSCE
TM
Daily Planned Maintenance
BURN/ELECTRICAL SHOCK HAZARD! Platen area is
HOT and can cause severe burns or severe shock.
Keep hands and objects out of the toaster unit! Failure
to exercise caution may result in serious injury! Turn
the unit off, unplug it and let it cool down completely
before touching or working on internal apparatus.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly
qualified person to avoid a hazard.
Do not immerse toaster in water. Do not clean with a
water hose or jet spray. Do not use abrasive cleaners,
pads or tools on the platen or the release sheet. Failure
to exercise caution will result in damage to the unit and
will not be covered by warranty. Cleaning and user
maintenance shall not be made by children without
supervision.
WARNING
WARNING
CAUTION
Gather cleaning materials.
You will need clean
cloths, neoprene gloves, Multipurpose Detergent
Solution, sanitizer solution, and lukewarm soap
and water.
1
Turn CTS off.
Turn the
On/Off switch located
on the lower right to the
Off position.
2
Unplug and let
cool.
Allow platen to
cool for 60 minutes
before cleaning. The
plug removed from
the outlet shall
remain clearly
visible to the
operator during the
maintenance procedure.
3
Remove bun
infeed by lifting
from toaster.
4
Remove the conveyor.
Use handle to lift the
conveyor up and away from CTS. Lay it on a clean
surface with the flat side down.
5
Remove the release sheet.
Lay the release sheet on
a flat surface.
6
