4
2. Press the desired channel button three times within
five seconds to cancel an active timing cycle.
IMPORTANT:
The channel timer buttons multicolored
LED indicator shows the status of the timer. The
indicator has three colors: green, yellow, and red. The
LED will be green during the first 70% of the count-
down. It changes to yellow during the next 20% of the
countdown. It will be red during the final 10% of the
countdown, and will start flashing red once the time
has run out.
3. The timer will countdown from the programmed
value to zero. At zero, the display flashes
End
and
the alarm sounds.
4. When the timing cycle is complete, and the alarm
sounds, press the channel button to cancel the
alarm.
CLEANING
1. Do not allow grease to build up on the timer, wipe it
down daily with clean damp cloth.
End
PART LIST
ITEM
PART NUMBER
DESCRIPTION
1
69-079S
Plastic Rivet (Pkg. Of 2)
2
740-030
Rear Cover (T88)
740-034
Rear Cover (T44 & T66)
3
740-067S
Main P.C. Board (T44)
740-065S
Main P.C. Board (T66 & T88)
4
740-077S
Wing Board (T88 Only)
5 88-653-2-4S
Speaker Assy.
6
541-135
Speaker Shim
7
740-026S
Switch Panel Assy. (T88)
740-027S
Switch Panel Assy. (T66)
740-028S
Switch Panel Assy. (T44)
740-089S
Switch Panel Assy. (T66MC)
8
740-032
Front Cover (T88)
740-036
Front Cover (T66 & T44)
9
70-048S
Knob W/Hardware
1 0
72-292S
Power Supply (110 Volt)
72-293-04FS
Power Supply (220-240V)
72-293-01JS
Power Supply (100 Volt)
IMPORTANT:
Do not use abrasive or chemical cleaners
on your timer, this may cause damage to the
overlay.
Printed in USA 3/06 © 2006
740
-5
19
revA
