Steamer 625-50
2
revA
Printed in USA
0
910
© 200
3
5
Steamer
625-A
Error Messages
CYCLES 2
9
The display now shows the product’s number of on-off water
valve cycles.
CYCLES 3
10
A. Press the UP or DOWN Arrow buttons to change the
number of water cycles.
B. Press the
Steamer
LOGO button to store the new water
cycle number and exit the Programming mode.
NOTE: Pressing the Product 3 button at any time exits the
Program mode without storing the change.
CYCLES 3
OFF 3.0
8
A. Press the UP or DOWN Arrow buttons to change the valve
OFF time.
B. Press the
Steamer
LOGO button to store the new valve
OFF time.
NOTE: Pressing the Product 3 button at any time exits the
Program mode without storing the change.
OFF 3.0
E
RROR
M
ESSAGES
A
CTION
No Heat Error.
Call service technician.
1
1
The display now shows the current product set temperature.
255
TEMP 275
1
2
1
3
Platen temperature can be set between 129°-1
76
°C (265°- 3
50
°F).
A. Press the UP or DOWN Arrow buttons to scroll to the
desired temperature.
B. Press the
Rapids Steamer
LOGO button to store the desired
temperature
.
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program mode without storing the change.
The display now shows the time delay between when the
product is finished and when the alarm sounds.
A. Press the UP or DOWN Arrow buttons to scroll to the
desired
time delay.
B. Press the
Rapid Steamer
LOGO button to store the desired
t
ime and to exit the Programming mode. .
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program mode without storing the change.
The
delay can be set for 0.0 to 10.0 seconds
.
5
AL DLY 2.5
TEMP 275
