4
The motors used on the Prince Castle Bun
Toasters, require monthly lubrication, 2-3 drops
of 3 in 1 oil. Motors that fail due to the lack of
monthly lubrication will not necessarily be
covered under warranty. We would like to have
field service technicians stress this mainte-
nance requirement whenever failures occur on
these toasters.
Oil Hole
The conveyor chain should not touch the top
surface of the crumb tray holder. If the chain does
touch, retention it by unplugging the unit, remove
both side covers, loosen the front bearing mount-
ing screws and pivot the bearing until the chain
no longer touches. Retighten bearing screws and
replace side covers
Conveyor Toaster
Model No. 428-BX
428-BX 428-513
Printed in the USA 0101 2002
PREVENTATIVE MAINTENANCE
WARNING:
Turn off power switch,
unplug toaster from wall outlet, and
let toaster cool down before doing
any repairs. All repairs should be
done by a qualified service techni-
cian.
WARNING: This unit is not water tight.
Do not clean with a water jet or jet
spray. Do not immerse the unit in
water
1. Set the POWER switch to OFF. Allow
toaster to cool for 30 minutes.
2. Unplug toaster.
3. Remove crumb tray and clean toaster and
parts by wiping with damp cloth.
Note:
Some units come with a Teflon coated
return chute. Do not use an abrasive cleaning
agent or scrub brush on the Teflon.
CLEANING
