2
ELECTRICAL INFORMATION
Model
Volts
Watts Amps
Hz
Plug
428-BX
208
2600
12.5
50/60 6-2OP
Conveyor Toaster
Model No. 428-BX
INSTALLATION
1.
After you have removed the toaster from the carton, inspect the unit for signs of damage. If there is damage to the
unit:
z
Notify carrier within 24 hours after delivery.
z
Save carton and packing materials for inspection purposes.
z
Contact your local dealer or, if purchased directly, the Prince Castle Customer Sales Department at 1-630-462-8800 to
arrange for a replacement to be sent.
2.
Verify that all parts have been received. Remove Protective Coating.
3.
Adjust legs so toaster is level.
4.
Remove packaging from bun slide and install bun slide in toaster by hooking it into the two pins in the rear of the
chamber.
5. The toaster fan located on the bottom of the toaster in the rear draws in cool room air and circulates it through the
toaster sides and tops. To insure adequate heat dissipation do not position the toaster where the fan would draw in
hot discharge from another appliance.
INTENDED USE
This toaster is designed to toast breads bagels or English
muffins. Do not attempt to toast croissants. Their butter
content will cause them to stick to the conveyor. Do not
attempt to toast products that have been buttered or spread
with jam or other coating Do not attempt to bake in the
toaster.
PRODUCT IDENTIFICATION
Lower Heater
Control Switch
Upper Heater
Control Switch
Speed
Control
Switch
Power
Switch
Extended
Conveyor
Assembly
Bun Ramp
428-BX 428-513
Printed in the USA 0101 2002
