3.
Check the seals before connecting a new gas container to the appliance.
Do not use
the appliance if it has damaged or worn seals.
4.
The threads on both the gas cartridge and the regulator,
must be intact if they are
damaged in any way or awry, replace the gas cartridge; or if the regulator is damaged, DO
NOT USE the stove. Order a new hose and regulator – see Accessories on the side flap.
5.
Inspect the hose (so that it is neither kinked nor squashed. Avoid twisting the flexible hose)
as well as the connections to the burners that they are not damaged. Lift the pan support
and drip tray
to ensure that the hose and connector are properly adjusted.
PREPARE THE STOVE.
Important:
Take care
to ensure that the stove is standing with its legs fully folded out on a
stable, flat surface with no combustible material nearby. Check its
stability! If you tip the stove while there are pots on it, you risk being
scalded by hot liquids.
1.
Stand the stove on its side with the handle
uppermost. Remove the regulator and hose
from the slot on the underside.
2.
Unfold the support legs
to their outermost extent. Place the stove with its support legs
downwards on a flat surface.
3.
Open the lid on the stove by angling the handle 90°.
It is important that the handle is
pointing straight up, otherwise the lid cannot be opened. Lift the lid as far as it will go.
4.
Fold out both wind shields
to their outermost position.
PRIM0035 - Instruktionsfolder_Inlaga.indd 6
2015-12-04 15:04
