background image

 
 

                                                                                        

Instruction Manual Octopus

 

 

 

 

Never use the ironing table to support any other machine or structure. 

 

It is strictly prohibited to do any kind of welding or alterations on the ironing table or 
its parts. 

 

It is strictly prohibited to remove any protective device/guards. 

 

It is strictly prohibited to intervene in the control units/circuit boards of the Ironing 
Table. 

 

It is  strictly forbidden  to  do  any  modification to  the  technical  specifications  of  the 
machine (electrical or mechanical) by third persons

.  

 

Please  contact  your  dealer  or  the  manufacturer  for  any  malfunction  or  further 
information requests 

 

3.2 Warning marks placed on the ironing table 

The following attention marks are placed on each ironing table: 

                                        

 

 

 

The operator of the system has the obligation to inform himself regarding the dangers which 
may occur during usage, so that he/she can avoid them or minimize their occurrence as best 
as he/she is able to. 
 

4.

 

Instructions for installation 

4.1

 

 Installation 

Put  the  ironing  table  in  the  designated  area  of  your  choice  and  align  the  machine  by 
increasing/decreasing the height of its feet 

No 14 (see the drawing of spare parts on page 

10)

. Make sure that the ironing table is stable and the ironing surface flat. 

 

4.2

 

 Connection to Power Supply 

For the electrical connection and above all for the power supply, please follow carefully the 
instructions of the electric diagram (enclosed) as well the warning signs symbols attached on 
the machine. In case you have purchased a single phase machine 230V, connect the machine 
onto a schuko socket 230V/16A. The connection should be done with  a tripolar cable 3

Χ

1,5 

mm (1 phase, 1 neutral, 1 grounded). The power should be provided with a fuse 16

Α

. If the 

machine  is  400V/3  phase,  the  connection  should  be  made  to  a  5-poles  cable  5

Χ

1,5  mm  (3 

Summary of Contents for OCTOPUS

















Reviews: