background image

 
 

                                                                                        

Instruction Manual Octopus

 

 

 

phase, 1 neutral, 1 grounding). The power should be secured with a  tripolar circuit breaker 
(3

Χ

10

Α

). 

For any device that is connected to a 3-phased current, make sure that the rotation of the 
motor is done clockwise. 

CAUTION! 

For your own safety, pay attention to all the warning labels (yellow colored) that 

are placed on the machine. The manufacturer bears no liability for any damages or accidents 
due to faulty supplying network or to not specified personnel. 

5.

 

Operating instructions 

For  the  instructions  mentioned  in  the  current  section  please  see  the 

below 

images (picture 4 & picture 5)

 
5.1

 

Activation Instructions 

 

Turn on the main switch 

No 1 

 

Turn on the switch 

No 2 

to activate the suction.

 

 

Turn on the switch 

No 3

 to activate the heating on the ironing 

surface.

 

 

Switch the thermostat that is placed below the buck to temperature 

110°C 

during the winter 

and to 90°C during the summer.  

 

 

Turn on the switch 

No 4

 to activate the heating

 

of the ironing bucks.

 

 

Whenever you want to activate the suction, step lightly on the foot pedal.

 

 

Adjust the intensity of the suction through the lever 

No 5

, which 

is located on the chimney. Adjust it from 0% - 100% depending 
on the fabric (weight, quality etc.). 

 

Adjust the amount of steam from the steam generator in 
proportion to the intensity of the suction to avoid the 
liquidification of the steam on the ironing surface. Thinner 
fabric requires smaller amounts of steam, while thicker fabric 
requires larger amounts. 

 

5.2 Additional Instructions 

*  

 

In case your table disposes a blowing system of air (optional):

 

 

Adjust the pressure of the blowing depending on the fabric 
(weight, quality etc.) from the lever 

No 6

 located beneath the 

ironing surface.

 

 

 

To activate the blowing, step lightly on the foot pedal.  

 

**In case the table disposes a Vario iron system (optional): 

 

Hook the steam iron from the balancer and adjust the distance of the steam iron from 
the working surface (approximately 5cm). After you have finished ironing, unhook the 
steam iron from the balancer and put it on the iron rest mat.  

 
 
 
 

Picture 4: 

Switches  

Summary of Contents for OCTOPUS

















Reviews: