Primo Water NY-158A, Use Instructions, Page: 24 / 29

23

Keep the appliance away from flammable materials e.g. Clothes,
curtains, upholstery, etc.

Always change the gas cylinder outdoors and away from any
sources of ignition.

In the event of a burn back (where the flame burns back to the
jet) immediately turn off the gas supply at the cylinder control
valve. After ensuring that the flame is extinguished, re-light the
appliance as described below. Should the appliance again burn
back, close the valve and return the appliance to the supplier
for examination/

If there is an apparent gas leak on the appliance e.g. smell of
gas, shut off the gas supply at the cylinder valve. Take the
complete assembly outside into a flame free environment and
test for the suspected leak as described below.

Do not check for gas leaks with a naked flame as this is
extremely dangerous!

To check for a gas leak, light the appliance and use a brush
dipped in a soapy water solution (e.g. water with dish washing
liquid added) and apply the brush to the suspect areas such as
the cylinder valve spindle or where the regulator screws into
the cylinder. Also check the joins between the hose and
regulator and between the hose and appliance. If there is a leak
then bubbles will form. Should this happen, turn off the gas
supply at the cylinder valve. Inspect the condition of the seal
fitted on the regulator and ensure that it is in good condition.
Refit the appliance to the cylinder and re-test using the soapy
water solution. If the leak persists then return the appliance
and the cylinder to the supplier for inspection and / or repair.