WARNING:
Do NOT mount floats in direct line of incoming liquid.
Keep floats clear of pumps, pipes, and motor cables.
Ensure floats cannot reach pump suction.
Keep floats clear of turbulent areas.
Do not run pump and float cables in the same conduit.
Two-Year Limited Warranty
For complete terms and conditions, please contact PRIMEX
®
.
PRIMEX
®
TwO-YEAR LIMITED WARRANTY
2
844-4PRIMEX (477-4639)
WWW.PRIMEXCONTROLS.COM
FLOAT INSTALLATION
TYPICAL FLOAT SET UP FOR A DUPLEX LIFT STATION
MAINTENANCE
●
Periodically inspect the product. Check that the cable has not become worn or that the housing has not
been damaged so as to impair the protection of the product. Replace the product immediately if any
damage is found or suspected.
●
Periodically check to see that the float is free to move and operate the switch.
●
Use only
PRIMEX
®
replacement parts.
