PRIMERGY PG-RD101, User Manual

Page: 62 / 76

62
Eject button/Unit Indicator
Press this button when ejecting the data cartridge from this product.
Normally, do not use this button, eject using the software.
The unit indicator shows this product's status.
Forced Ejection Hole
This hole is used for urgent forced ejection. The data cartridge can be ejected by using a paper clip,
etc, to press the button in the hole. Use this function to eject the data cartridge if power is not supplied
to this product.
Cartridge Indicator
Displays the status of the data cartridge inserted in this product.
Display Status
Off Power is not supplied to this product.
Solid Green Power is supplied, and this product can be used.
Blinking Green Data cartridge is being ejected.
Solid Amber This product detected an error (data cartridge ejection is failed, or this product
may be damaged).
Blinking Amber The eject button was pressed while the data cartridge was being accessed.
After blinking amber for a few seconds it will return to solid amber.
Depending on the software, the data cartridge will be ejected after if there is
no ejection prohibition.
Do not use the forced ejection function to eject a data cartridge when the power to
this product is supplied. This may cause an OS/ backup software error, or damage
the data cartridge.
Display Status
Off The power to the data cartridge is not supplied. The data cartridge is not
inserted correctly or the data cartridge may be damaged.
Solid Green The data cartridge is ready.
Blinking Green The data cartridge is operating.
Solid Amber
or blinking Amber
This product detected a data cartridge error (The data cartridge may be
damaged).