Primera PX450e, User Manual

Page: 34 / 40

30
Media and Roll Specifications
Section 7: Media and Roll
Specifications
Important Note: Printing labels is not recommended as this printer
was designed for continuous media. However, since
the printer is capable of sensing labels, the following
information that is specific to labels is provided with
no representations regarding reliability.
Max Min
Label/Print width 4.25" (108mm) 0.75" (19mm)
Liner/Media width 4.25" (108mm) 1" (25.4mm)
Label height/length 24" (609.6mm) 0.75" (19mm)
Gap between labels 0.75" (19mm) 0.10” (2.5mm)
Width of thru-hole 0.5" (12.7mm) 0.375” (9.5mm)
opening
Label Width
Liner/Media Width
Distance from
edge of label
to edge of liner
Width of Opening
Black Mark
Width
Gap Between
Labels
Label Height
Label Sensing Methods
Method 1 : Label
Gap Sensing
Method 2 : Thru-Hole
Sensing
Method 3 : Reflective/Black
Mark Sensing
(Black Mark must be printed
on back side of label stock)
Note: See table below for Max and Min values in inches and mm..