Primera CD Color Printer IV Page 2 User Manual Download

Page: 2 / 44

Notices:

The information in this document is subject to change without notice.

NO WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. No liability is assumed for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material. This

document contains proprietary information which is protected by copyright. All rights are reserved.

No part of this document may be photocopied, reproduced, or translated into another language

without prior written consent.

Trademark Acknowledgments:

IBM is a registered trademark of International Business

Machines Corporation. Windows is a trademark of Microsoft Corporation. All other trademarks are the

property of their respective owners. CandelaColor

Charged by Pictographics is a registered trademark

of Pictographics International Corporation.

Printing History

FCC Compliance Statement:

This device complies with part 15 of the FCC rules. Operation

is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause undesired

operation.

For Users in the United States:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with the Class B limits of Part 15 of the FCC Rules. You

are cautioned that any changes or modifications not expressly approved in this manual could void

your authority to operate and/or obtain warranty service for this equipment.
Within the U.S., this product is intended to be supplied by a UL Listed Direct Plug-in Power Unit

marked Class 2 and rated 30 Vdc, 500 mA or 830 mA.

For Users in Canada:

This digital apparatus does not exceed the Class B limits for radio noise

for digital apparatus set out on the Radio Interference Regulations of the Canadian Department of

Communications. Le present appareil numerique n’emet pas de bruits radioelectriques depassant les

limites applicables aux appareils numeriques de la class B prescrites dans le Reglement sur le

brouillage radioelectrique edicte par le ministere des Communications du Canada.

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE EXTERIOR PANELS. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. OPERATE

THE UNIT WITH ONLY THE PROPER ELECTRICAL SPECIFICATIONS AS LABELED ON THE