background image

Using the CD Color Printer IV with Windows  17

2. In Windows 95/98/Me, you will see several tabs from

which printer settings can be changed including 

Media

,

Device Options

Cartridge

, and 

Calibrate

. In Windows NT,

click on the 

Advanced 

tab of the Document Settings

window. In Windows 2000/XP click on the 

Advanced

button for more driver settings.

NOTE:

Most applications allow you to change these same printer driver

options from their “Print” and/or “Printer Setup” screens. This

means that you don’t have to go back to the main printer setup

window each time you want to change a setting or option in the

printer driver. These applications will usually give you the same

choices and options, but in a slightly altered format.

3.  In Windows 95/98/Me, you must click on one of the four

tabs to see the printer setting options; each tab contains

different printer settings.  In Windows 2000 the Layout and

Paper/Quality tabs appear; the Advanced button contains

more printer driver settings. Although each printer driver

displays the print options in a slightly different format, the

basic options are the same. Refer to the remainder of this

section for a description of each printer driver option.

510132.qxd  11/15/01  4:04 PM  Page 17

Summary of Contents for CD Color Printer IV













































Reviews: