Primera Bravo II User Manual Download Page 8

Page: 8 / 60

Rear Panel

This illustration shows the input ports found on the rear panel

of the Publisher:

The USB 2.0 Interface is connected to an open USB 2.0 port on

your PC with the USB 2.0 cable, included with your Publisher.
The

Power Input

Port

connects to the included 100V~240V 12V

switching power supply.

PC SYSTEM REQUIREMENTS

Before getting started, it is important for you to verify that

your PC meets the minimum system requirements.
• 700 MHz or faster Pentium III/IV processor running

Windows 2000, XP or Vista

• 512 MB or greater RAM
• Free hard drive space of at least 10 GB.
• Available USB 2.0 Port.

If your PC does not have at least these minimum system

requirements, system performance may not be acceptable.

MAC SYSTEM REQUIREMENTS

Before getting started, it is important for you to verify that

your computer meets the recommended system requirements.

Here's what you need in order to successfully burn and print

with the Discribe software:

• G4 PowerPC 700MHz or higher running OS X version 10.2

or higher

• 256MB

RAM

• Free hard drive space of at least 2 GB (up to 6 GB for DVD)
• Available USB 2.0 Port

4 Getting Started

USB 2.0 Port

Power Input Port

510873.qxd 1/25/2007 2:39 PM Page 4

Summary of Contents for Bravo II





























































Search results

Summary of Contents for Bravo II

Reviews:

Related manuals for Bravo II

Brands by name

Popular brands

Primera Bravo II, User Manual

Search results

Summary of Contents for Bravo II

Reviews:

Related manuals for Bravo II

Brands by name

Popular brands