manualshive.com logo in svg

Primera Bravo II, User Manual

Share
Download
Primera Bravo II User Manual Download Page 27

Creating Discs on a PC  23

Click on the 

Disc Publisher II

icon with the right mouse

button and select 

Printing Preferences

.

NOTE:

Most applications allow you to change these same printer driver

options from their "Print" and/or "Printer Setup" screens.  This

means that you don't have to go back to the main printer setup

window each time you want to change a setting or option in the

printer driver.  These applications will usually give you the same

choices and options, but in a slightly altered format. Some

applications do not save your printer driver option changes, but

instead only use your changes for the current image.

Paper Size

The paper size option will be set to CD for printing onto

printable surface CDs and DVDs. 

Resolution

Select the appropriate print quality option for your image.

Keep in mind that Normal 600 provides the lowest quality but

fastest print, and that Ultra Photo 4800 provides the highest

quality but slowest print.  You may wish to experiment with

these options to see which one is best for your particular CD

media and print quality requirements.

510873.qxd  1/25/2007  2:39 PM  Page 23

Summary of Contents for Bravo II





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands