Scan Channels
After selecting a type of
from the current tuner, press
scanning channels.
Auto tuning screen will pop out. Confirm “Start Scan”
to continue for the channel scanning
This step may take 10
All the current stored channels will
or replaced with new channel information after
doing “Start Scan”.
Find Channel
Using this opt
them to the channel list on a particular frequency,
which refers to physical channels, not the virtual
channels.
For an example, enter the physical channel number
31, and it may find three
and 5-3 and add them to the list.
EPG Tuning Mode
By default, EPG Tuning Mode is set to On. This way
channel every time
information
channel but
information
Scan Channels
After selecting a type of
current tuner, press
scanning channels.
Auto tuning screen will pop out. Confirm “Start Scan”
to continue for the channel scanning
This step may take 10
All the current stored channels will
or replaced with new channel information after
doing “Start Scan”.
Find Channel
Using this option, you can find new channels and add
to the channel list on a particular frequency,
which refers to physical channels, not the virtual
For an example, enter the physical channel number
31, and it may find three
3 and add them to the list.
EPG Tuning Mode
By default, EPG Tuning Mode is set to On. This way
every time and retrieve
information. If set to Off, unit won’t tuneto the
but display whatever available program
information previously saved in the system memory.
Navigating the On
After selecting a type of RF Input (antenn
current tuner, press the
OK
Auto tuning screen will pop out. Confirm “Start Scan”
to continue for the channel scanning
This step may take 10-15 minutes or more.
All the current stored channels will
or replaced with new channel information after
doing “Start Scan”.
ion, you can find new channels and add
to the channel list on a particular frequency,
which refers to physical channels, not the virtual
For an example, enter the physical channel number
31, and it may find three virtual channels
3 and add them to the list.
By default, EPG Tuning Mode is set to On. This way
and retrieve the latest
. If set to Off, unit won’t tuneto the
display whatever available program
previously saved in the system memory.
Navigating the On
RF Input (antenna or cable)
OK
key to start
Auto tuning screen will pop out. Confirm “Start Scan”
to continue for the channel scanning.
15 minutes or more.
All the current stored channels will be deleted
or replaced with new channel information after
ion, you can find new channels and add
to the channel list on a particular frequency,
which refers to physical channels, not the virtual
For an example, enter the physical channel number
virtual channels like 5-1, 5
By default, EPG Tuning Mode is set to On. This way
the latest program
. If set to Off, unit won’t tuneto the
display whatever available program
previously saved in the system memory.
Navigating the On-Screen Menus
a or cable)
key to start
Auto tuning screen will pop out. Confirm “Start Scan”
15 minutes or more.
be deleted
or replaced with new channel information after
ion, you can find new channels and add
to the channel list on a particular frequency,
which refers to physical channels, not the virtual
For an example, enter the physical channel number
1, 5-2
By default, EPG Tuning Mode is set to On. This way in Guide screen
program
display whatever available program
previously saved in the system memory.
Screen Menus
in Guide screen, unit will tune to
Screen Menus
, unit will tune to the hig
Page
the highlighted
Page 26
hlighted
