Power Up and Setup
After connecting PHD
run initial setup procedures including an automatic channel
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
initial stage.
To start:
1. Plug the Power
into the AC outlet.
2. Press
side of the unit. Wait until the red light and
clock time (normally showing 12:00
come out from
right side.
3. Then, press either r
panel Standby button to turn on the unit.
4. Boot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
will be NO video on the TV screen during boot up
time. After boot up
show “no ch” and the green light will be on.
5. At t
initial set up menu from PHD
setups
Quick Set up
Press remote control
proper language
message screens
Time Zone
Press remote control
proper time zone in your area.
Power Up and Setup
After connecting PHD-
run initial setup procedures including an automatic channel
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
initial stage.
Plug the Power
into the AC outlet.
ress the Power button
side of the unit. Wait until the red light and
clock time (normally showing 12:00
come out from
right side.
Then, press either r
panel Standby button to turn on the unit.
oot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
will be NO video on the TV screen during boot up
time. After boot up
show “no ch” and the green light will be on.
At this point, your TV screen should display the first
initial set up menu from PHD
setups to complete
Quick Set up
:
Press remote control
▲
proper language you want to use for menus and
message screens.
Time Zone
:
Press remote control
▲
proper time zone in your area.
Power Up and Setup
VRX with proper input and output sources
run initial setup procedures including an automatic channel
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
Plug the Power cord from the
into the AC outlet.
Power button located
side of the unit. Wait until the red light and
clock time (normally showing 12:00
come out from the unit display panel on the
Then, press either remote
POWER
panel Standby button to turn on the unit.
oot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
will be NO video on the TV screen during boot up
time. After boot up is complete, the front panel will
show “no ch” and the green light will be on.
his point, your TV screen should display the first
initial set up menu from PHD
to complete the procedures:
▲
/
▼
, then
OK
you want to use for menus and
▲
/
▼
and then
proper time zone in your area.
Power Up & Initial Setup
VRX with proper input and output sources
run initial setup procedures including an automatic channel
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
cord from the back of the
located on the left
side of the unit. Wait until the red light and
clock time (normally showing 12:00
AM
)
unit display panel on the
POWER
key or the front
panel Standby button to turn on the unit.
oot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
will be NO video on the TV screen during boot up
is complete, the front panel will
show “no ch” and the green light will be on.
his point, your TV screen should display the first
initial set up menu from PHD-VRX HDMI output port. Then, f
procedures:
OK
to select the
you want to use for menus and
and then
OK
to select the
Power Up & Initial Setup
VRX with proper input and output sources
run initial setup procedures including an automatic channel scan. This
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
back of the unit
left
side of the unit. Wait until the red light and
)
unit display panel on the
key or the front
panel Standby button to turn on the unit.
oot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
will be NO video on the TV screen during boot up
is complete, the front panel will
show “no ch” and the green light will be on.
his point, your TV screen should display the first
VRX HDMI output port. Then, f
to select the
you want to use for menus and
to select the
Power Up & Initial Setup
VRX with proper input and output sources, you will
scan. This initial setup
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
oot up time usually takes about 30 seconds. During
boot up, the front display panel shows “BOOT”. There
VRX HDMI output port. Then, follow
will need to power up the unit and
initial setup is required only
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
ollow several on-screen initial
Page
power up the unit and
is required only
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
screen initial
Page 17
power up the unit and
during the first time using the unit, or after activating the “Reset All” feature to set the unit back to its
