Contact us for assistance: (866) 985-7877 | www.primepelletgrills.com
ASSEMBLY | 8
ASSEMBLY
4
Attach the
Grill Door Handle
e
: Loosen and remove the two
Bolts
and
Washers
from either end
of the
Grill Door Handle
. Place the
Washers
on the
Bolts
, and from the inside of the door, insert
one through each eyelet in the grill door into either end of the
Grill Door Handle
. Fully tighten both
Bolts
using the included
Wrench
.
Hardware Used
(pre-installed in handle)
:
Bolt (1/4x20) x 2
Washer (1/4) x 2
4
5
Attach the
Haul Handle
w
: Loosen and remove the two
Flange Nuts
and
Spring
Washers
from
either end of the
Haul Handle
. Insert the threads on the
Haul Handle
into the eyelets below the
Chimney
. From inside the
Grill Body
, slide a
Spring
Washer
onto each set of threads, then secure each
end with a
Flange Nut
. Fully tighten both
Flange Nuts
using the
Wrench
.
Hardware Used
(pre-installed on Haul Handle)
:
Flange Nut (10-32) x 2
Spring Washer (10-32) x 2
5
e
w