PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
6
Even
Even
Even
Even
Rear
Center
Even
Even
Front
VRR3-FT31G-ST B
ASE
ASSEMBL
Y INSTR
UCTIONS–RA
CK MOUNTING
3.1
3.2
Position and place the rack assembly
onto the Mounting Spacers.
Insert the 65MM Flat Head Bolts into each Crossbar Strip Nut,
then through the Mounting Spacer and into the Channel Strip
Nuts. Do not tighten the bolts at this time.
3.3
Leave these bolts
loose until Step 3.5
Mounting Spacer
3.5
CROSSBAR ADJUSTMENT
Torque bolts
to 90 in-lbs
3.4
Position and center the Front and Rear Crossbars on the
FBM Mounting Channels and Spacers as shown below.
Position one Mounting Spacer on each of
the six Strip Nuts, aligning the bolt holes.
Summary of Contents for VRR3-FT31G-ST
Page 1: ......
