Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
2
1
Left Rear
Figure A
36.00”–60.00”
CROSSBAR RETROFIT SEQUENCE
CBR-0010
ASSEMBL
Y INSTR
UCTIONS–CENTER CROSSB
AR
NOTE: Crossbars and the Base Mounting
System are shown for illustrative purposes
only. The instructions contained in this
Manual will apply across many model
combinations and variations.
Loosen
Nuts
1.2
FRONT MOUNTING BRACKETS
1.1
Remove and retain Channel End
Caps and screws for Step 2.2
2.1
Loosen bolts
Slide front Mounting
Brackets and adjust
as shown in Figure A.
2.2
Place the new Mounting
Brackets under the Front
Crossbar as shown then
reinstall the End Caps.
CENTER CROSSBAR
