PrimAster PMAB 40 Original Instructions Manual Download Page 25

23

 CAUTION

Hearing damage

A longer stay in the immediate vicinity of the running 

unit may cause hearing damage. Wear ear protectors.

When working with the device, a certain level of noise 

cannot be avoided. Noisy work should be scheduled for 

hours, during which it is allowed by statute or other local 

regulations. Adhere to any applicable rest times and limit 

your working time to the necessary minimum time. For 

your personal protection and the protection of people 

nearby, suitable hearing protection must be worn.

Please observe the following: according to the German 

Machine Noise Protection Regulation from September 

2002, this device may not be operated on Sundays 

and Bank holidays or working days from 8pm to 7am. 

Furthermore, it is forbidden to operate the machine at the 

following times of day: from 7 a.m. to 9 a.m., from 1 p.m. to 

3 p.m. and from 5 p.m. to 8 p.m.
Please do also consider any local regulations concerning 

noise protection!
Keep noise and vibration to a minimum!
•  Only use devices that are in a fl awless condition.

•  Maintain and clean the device on a regular basis.

•  Adapt the way you work to the device you are using.

•  Do not overload the device.

•  Have the device checked if required.

•  Switch off  the device when it is not being used.

•  Wear protective gloves.

SYMBOLS

Warning / Caution!

Warning! Please read the instructions carefully 

before starting the machine.

Warning against thrown-off  items

Do not let other persons get near due to 

foreign objects being thrown off . 

Risk of injury by rotating impeller.

Keep hands and feet away.

Do not expose tools to rain. Do not use tools in 

damp or wet locations.

Wear goggles. 

Wear ear protectors.

... V

  

... Ah

Battery voltage

Direct Current

Battery capacity

XX

Guaranteed sound power level

Remove the battery pack before starting any 

adjustment, cleaning and maintenance work 

on the device.

Please read the instructions carefully before 

starting the machine.

54,5x24,5mm

91.7x13.7mm

91.7x13.7mm

LBB 202 

Made in China

38x10mm

Cutting-Line

 (do not print !)

=

Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany

www.ikra.de

CE  5 x 7 mm

Typ LI 22

201x

20V

2,0Ah

40Wh

45

Protect the battery against temperatures above 

45°C.

54,5x24,5mm

91.7x13.7mm

91.7x13.7mm

LBB 202 

Made in China

38x10mm

Cutting-Line

 (do not print !)

=

Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany

www.ikra.de

CE  5 x 7 mm

Typ LI 22

201x

20V

2,0Ah

40Wh

45

Protect the battery against heat and fi re..

54,5x24,5mm

91.7x13.7mm

91.7x13.7mm

LBB 202 

Made in China

38x10mm

Cutting-Line

 (do not print !)

=

Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany

www.ikra.de

CE  5 x 7 mm

Typ LI 22

201x

20V

2,0Ah

40Wh

45

Protect the battery against water and moisture.

V

Output voltage

Direct Current

Output current

~

Input voltage / AC Current

Mains frequency, Rated input

Safety class II

Only use the device indoors.

Fuse

European Conformity Mark

GB

   ENGLISH

Summary of Contents for PMAB 40









































Reviews: