25
GB
15. Troubleshooting
Problem
Possible Cause
Help
Motor doesn’t
start
a) ON/OFF switch damaged.
b) ON/OFF cable damaged.
c) ON/OFF relay damaged.
d) Fuse blown.
e) Motor burnt.
a-d) Replace all damaged parts before
you use your machine again.
e) Contact your local service centre.
Every attempt to carry out a repair,
can be dangerous if it is not done by
skilled personnel.
Machine gets
slower during
work.
Too much pressure put on the
workpiece.
Reduce the pressure on the workpiece.
Sanding belt
comes off the
drive pulleys.
Belt does not run straight.
Reset the track.
The wood gets
burnt during
sanding.
a) Sanding disc or belt covered with
grease.
b) Excessive pressure on
workpiece.
a) Replace disc or belt.
b) Reduce pressure on workpiece.
