DD35 Compact Disc Transport User Guide
1
Using the settings menus
You can view and change the DD35 settings from the front
panel, remote control, or using the Prisma app.
to display the settings menu
Press
>
/
]
and
*
/
å
on the front panel simultaneously,
or the
mEnU
button on the remote control.
The settings menu is displayed:
DD35 SETTINGS
PLAYBACK
GENERAL
to step between settings
Press the
>
/
]
or
*
/
å
buttons on the front panel, or
the
A
or
V
buttons on the remote control.
The current setting is shown highlighted.
To change a setting
Press and hold the
>
/
]
button on the front panel, or
press the
sELECt
button on the remote control.
The current value is shown highlighted.
Press the
>
/
]
or
*
/
å
buttons on the front panel, or
the
A
or
V
buttons on the remote control, to change
the value of the setting.
As you change it the new value is shown in the menu.
Press and hold the
>
/
]
button on the front panel, or
press the
sELECt
button on the remote control, to save
the value you have set.
to navigate back or cancel editing a setting
Press and hold the
*
/
å
button on the front panel, or
press the
button on the remote control.
to exit from the settings menu
Press
>
/
]
and
*
/
å
on the front panel simultaneously,
or press the
mEnU
button on the remote control.
l
l
l
l
l
l
l
pLaYBaCK sEttinGs
The
pLaYBaCK sEttinGs
menu allows you to customise
the auto resume feature:
PLAYBACK SETTINGS
AUTO RESUME
OFF
aUto rEsUmE
Specifies whether disc playback will start from the
previously saved point.
Choose
oFF
to play from the beginning or
on
to play
from the previously saved point.
GEnEraL sEttinGs
The
GEnEraL sEttinGs
menu allows you to configure the
general operation of the DD35:
GENERAL SETTINGS
FRONT PANEL
UNLOCKED
AUTO-DIM
AFTER 10MIN
LED BRIGHTNESS
Front panEL
Choose
LoCKED
to lock the front panel buttons and
knobs, or
UnLoCKED
(default) to use them.
To unlock the front panel buttons use the remote control to
select this menu, or remove power from the DD35 for a
few seconds.
aUto-Dim
Allows you to choose the delay for dimming the display
after no user interaction, between:
aFtEr 1min
,
aFtEr
5min
,
aFtEr 10min
(default), or
oFF
.
LED BriGHtnEss
Displays the
LED BriGHtnEss
menu to allow you to set the
display brightness to between 1 and 5 for each display
dimming level:
Dim HiGH
(default 3),
Dim miD
(default ),
Dim LoW
(default 1), or
Dim oFF
(default 1).
stanDBY sEttinGs
Displays the
stanDBY sEttinGs
menu to allow you to
specify the standby settings.
aUto-stanDBY
automatically switches the DD35 to
standby if there is no user interaction or audio from the
current source for a specified delay:
aFtEr 10min
,
aFtEr
15min
,
aFtEr 20min
(default), or
oFF
.
FaCtorY rEsEt
Resets the DD35 to the factory default settings.
You are prompted to confirm. Select
YEs
to proceed or
no
to cancel.
FirmWarE VErsions
Displays the
FirmWarE VErsions
menu to allow you to
view the versions of firmware installed.
CONFIGURING THE SETTINGS
