DD35 Compact Disc Transport User Guide
11
Changing the front panel display
You can choose how the time is shown on the front panel
display, and change the brightness.
to change the time display
Press the
i
button.
The display switches between the following four options:
Elapsed time for the current track
3:5
Remaining time for the current track
-1:15
Elapsed time for the entire disc
18:5
All
Remaining time for the entire disc
-1:15
All
to change the front panel display brightness
Press the
Dim
button on the remote control to step
through the three levels of illumination and blank.
If you turn the display off it will be restored briefly when
you operate any control.
The display automatically dims after ten minutes; you can
adjust this delay in the settings menus; see
GENERAL
SETTINGS, page 1.
l
l
playing a specific track
You can play from any track by entering the track number
on the remote control.
to play from a specific track
Specify the track number by pressing one of the buttons
1
-
9
.
To enter a two-digit track number press and hold down the
button corresponding to the first digit, and then press the
second digit.
To enter a three-digit track number press and hold down
the 0 button, and then press the three digits.
l
repeat playback
You can play the current track repeatedly, or repeat the
entire disc.
to repeat the current track
While the disc is playing:
Press the
button on the remote control.
The front panel shows
rpt
.
to repeat the entire disc
Press the
button twice.
The front panel shows
rpt
aLL
.
to turn off repeat
Press the
button again.
The
rpt s
ymbol in the display will be cleared.
l
l
l
ADVANCED FEATURES
