13
BOTTOM
strap passes
through these
metal loops
15a/15b:
Attach Ratchet Straps on either outer
side of the Tree Brace
(See Ratchet Strap
Instructions for correct weaving).
15a/15b:
Attach Installation Straps on either outer side of the Tree Brace just behind the ratchet straps (as shown
above)
(See Installation Strap instructions for correct weaving).
Assembly Instructions Page 5
15b
Carefully tilt ladder stand assembly forward so that the bottom is facing
forward and the rear is facing upward. With Horizontal Jaw Assembly Strap
passed through the top loop of Vertical Jaw Assembly Strap ,
connect the two right/left ends of the Horizontal Jaw Assembly Strap to
Left Ladder Jaw and Right Ladder Jaw using
2-M8x45mm bolts .
Check to make sure that Vertical Jaw Assembly Strap is passing
through the metal loops on tree brace and the bottom of the Foot
Platform Assembly (as shown right).
13
15
15a
BOTTOM
BOTTOM
BOTTOM
Model: PVLS-316
17’ Single Vantage Deluxe Ladder Stand
Customer Service Department 1-866-972-6168
www.primaltreestands.com
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
©2020 (rev. 1/20)
From
bottom
Straight
Jaw
Curved Jaw
From
top
14
NOTE: When fastening the Horizontal Jaw Strap to the Jaws, the bolts
must be inserted as follows.
Right Jaw (curved) -
Insert
1-M8x45mm bolt
through the Horizontal
Jaw Assembly Strap fastener and then through the top of the Right Jaw .
Straight Jaw (straight) -
Insert
1-M8x45mm bolt
through the Horizontal
Jaw Assembly Strap fastener and then through the bottom of the Straight Jaw .
45
45
14
