Primada PRH900, Instruction Manual

Page: 40 / 49

U npacking。
1 . 1 Take out aluminium foil tube ;
1 . 2 Take out side panel package
1 . 3 Take out rangehood。
Fixate screw 。
2 . 1 Draw a horizontal line
730-780 mm above the
benchtop, then draw a
centerline from the benchtop,
so it intersects the horizontal
line (see figure 4.1).
730-780mm
Horizontal line
Stove centerline
38
Align the bottom edge of the mounting
plate with the horizontal line; then align
the triangular point with the centerline
of the stove. Should keep the mounting
bracket still at all time. If using
expansion anchors, mark those
2 holes on the wall. If using a wall
mounting bracket, then mark
the 3 drilling holes on the wall
(see figure 4.2).
730-780mm
Mounting plste
Holes for expansion anchor
Holes for wall
mounting brackets
4.4 Installation Procedure
Figure 4 . 1 PRH900 / PRH900A ( with rear glass)/PHR900/
PHR910A (with rear glass) drilling diagram
Figure 4 . 2 PRH900 / PRH900A ( with rear glass)/PHR900/
PHR910A (with rear glass) drilling diagram