background image

Quantum R-4000

                www.pridemobility.com

11

I I .   S A F E T Y

Weight Limitations

Your power chair is rated for a maximum weight capacity. Please refer to the specifications table for this limit.

MANDATORY! Stay within the specified weight capacity of your power chair. Exceeding the weight

capacity voids your warranty. Pride will not be held responsible for injuries and/or property damage

resulting from failure to observe weight limitations.

WARNING! Do not carry passengers on your power chair. Carrying passengers on your power

chair may affect the centre of gravity, resulting in a tip or a fall.

Tyre Inflation

If your power chair is equipped with pneumatic tyres, you should check or have the air pressure checked regularly. Proper
inflation pressures will prolong the life of your tyres and help ensure the smooth operation of your power chair.

WARNING! It is important that the psi/bar/kPa air pressure rating indicated on the tyre be maintained

in pneumatic tyres at all times. Do not underinflate or overinflate your tyres. Low pressure may

result in loss of control, and overinflated tyres may burst. Failure to maintain the psi/bar/kPa air

pressure rating indicated on the tyres at all times may result in tyre and/or wheel failure.

WARNING! Inflate your power chair drive tyres from a regulated air source with an available

pressure gauge. Inflating your tyres from an unregulated air source could overinflate them, resulting

in a burst tyre.

WARNING! When changing a tyre, remove only the centre lug nuts, then remove the wheel. If any

further disassembly is required, deflate the tyre completely or it may explode.

NOTE: If the tyres on your power chair list the psi rating only, use the following conversion formulas to find
the bar or kPa rating: bar = psi x 0.06895; kPa = psi x 6.89476.

Incline Information

More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access. Some ramps
may have turning switchbacks (180-degree turns) that require you to have good cornering skills on your power chair.

!

Proceed with extreme caution as you approach the downgrade of a ramp or other incline.

!

Take wide swings with your power chair’s front wheels around any tight corners. If you do that, the power chair’s rear
wheels will follow a wide arc, not cut the corner short and not bump into or get hung up on any railing corners.

!

When driving down a ramp, keep the power chair’s speed adjustment set to the slowest speed setting to ensure a
safely controlled descent.

!

Avoid sudden stops and starts.

When climbing an incline, try to keep your power chair moving. If you must stop, start up again slowly and then accelerate
cautiously. When driving down an incline, set your power chair to the slowest speed setting and drive in the forward
direction only. If your power chair starts to move down the incline faster than you anticipated or desired, allow it to come
to a complete stop by releasing the joystick, then push the joystick forward slightly to ensure a safely controlled descent.

WARNING! When on any sort of an incline or decline, never place the power chair in

freewheel mode, especially while seated on it or standing next to it.

WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of

the incline. Drive your power chair straight up the incline. This greatly reduces the

possibility of a tip or a fall. Always exercise extreme caution when negotiating an incline.

WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas

covered with snow, ice, cut grass or wet leaves).

WARNING! Never travel down an incline rearward. Doing so may cause the power

chair to tip. Always exercise extreme caution when negotiating an incline.

Summary of Contents for QUANTUM R-4000 series








































Reviews: