Pride Jazzy 1402 Owner'S Manual Download Page 25

Page: 25 / 42

Jazzy 1402

www.pridemobility.com

V . C O M F O R T A D J U S T M E N T S

13. Reinstall the trapeze bars and secure with the quick-re-

lease pins.

14. Reinstall the seat.

NOTE: Make sure the seat latch safety is flipped down
before using the power chair.

15. Plug the controller connector(s) into the electronics tray.

Seat Position Adjustment

You can move the seat forward or rearward by changing the
extrusion mounting position.

To change the position:
1. Turn off the power to the controller.
2. Unplug the controller connector(s) from the electronics

tray.

3. Remove the seat from the power base.
4. Remove both extrusions from the bottom of the seat.
5. Reposition the extrusions on a different set of mounting

holes. You must move both extrusions the same number
of holes either forward or backwards. See figure 17.

6. Fasten the extrusions back onto the bottom of the seat.
7. Reinstall the seat.
8. Plug the controller connector(s) into the electronics tray.

Seatback Angle Adjustment

If your power chair is equipped with an adjustable seatback,
you can adjust it to four (4) different angles: 90°, 102°, 105°,
or 107°.

To adjust the seatback angle:
1. Remove the seatback angle adjusting screw from each

seat hinge. See figure 18.

2. Set the seatback at the desired angle.
3. Reinstall the screws on both seat hinges and tighten.

Figure 17. Seat Position Adjustment

SEAT MOUNTING HOLES

Figure 18. Armrest and Seatback Adjustments

SEATBACK
ANGLE
ADJUSTING
SCREW

ARMREST KNOB

JAM NUTS

ARMREST ANGLE
ADJUSTING
SCREW

Summary of Contents for Jazzy 1402











































Search results

Summary of Contents for Jazzy 1402

Reviews:

Related manuals for Jazzy 1402

Brands by name

Popular brands

Pride Jazzy 1402, Owner'S Manual

Search results

Summary of Contents for Jazzy 1402

Reviews:

Related manuals for Jazzy 1402

Brands by name

Popular brands